Defender C2402 Halon Recovery/Reclaiming Unit

Additional Defender Specifications


The Defender C2402 is a high efficient, high capacity recovery and reclaiming unit designed to process Halon 2402 (Hladon 114B2). This unit was patterned off of our military Defender M1 unit components.

The C2402 is a self-contained unit exceeding 99% efficiency, with a four-filter system to remove typical particulate matter, residue and moisture while in operation. This unit can process Halon 2402 (Hladon 114B2) from pressurized cylinders and non-pressurized drums. Process time for the liquid depends on the pressure of the unit. Average process time for liquid recovery is 5 pounds (2.5 kg) per minute. Non-pressurized material has a minimum recovery rate of 1 kg per minute.

The unit comes equipped with three site glasses to assist in monitoring the material that is being processed

The tank has a pressure rating of 400 psig (34 Bar). It has a capacity of 500 pound (200 kg). This tank is equipped with a liquid level gauge.

The chiller module (not pictured) connects to the processing tank to remove the non-condensable gases in an efficient manner. The chiller's operating temperature is set at –10 degrees Celsius but this unit has a maximum range of –20 degrees Celsius.

After the non-condensable gases have been removed during the chilled venting process, the C2402 unit can safely fill a drum or tank with the processed Halon 2402. An electric pump is utilized during the fill process with an average fill time of 30 pounds (12 kg) per minute.

This unit is dependable, rugged and easily maintained.

Accessories that can be purchased with this unit are scales, cylinder inverters, forklift drum lifters.

Contact RemTec International for all of your Halon equipment needs .
011-419-867-8990
www.remtec.net

Back to equipment page